Boots – Nottingham

I boarded the 49 bus to Boots.

I alighted from the 49 bus at Boots and proceeded to take a look around.

Unsurprisingly the construction work was now complete.

The pharmaceutical factory for the Boots Company was built in the 1930s and was designed by Sir E Owen Williams. It uses reinforced concrete as an external frame. The strength of the frame allowed the design to incorporate large areas of glass.

Much of the site is now listed.

Here is the company’s official history

Photograph taken December 1994 © Copyright Crown copyright

D10 Wets Building

D6 Dry Building

D34 Fire Station – now offices.

At this point I was asked to leave the site – having arrived on a public service bus, I was unaware that this was a restricted area.

This was explained to me by the ever so helpful security staff.

I made my excuses and left.

D90Skidmore Owings & Merrill and Yorke Rosenberg & Mardell 1967-69

Factory – Windmill Lane Denton

I’ve cycled by here for some fifty years or more – always admiring its serrated roof.

Way back when we would roam around on our bikes, exploring the waste ground adjacent to Jackson’s Brickworks.

Where we would scavenge tape from the Rotunda tip.

I remember it as a Remploy Centre.

My last 13 years prior to retirement last May were spent at the centre, on Windmill Lane, Denton. Just before I left, a lot of demolition work was done, prior to redevelopment of much of the site.

I seem to remember the place always being referred to locally as Th’ Rehab – the Rehabilitation Centre, a Government training centre, where skills were taught, such as joinery, bricklaying etc, and there was also a Remploy Unit housed there.

Local men could go for a free haircut, administered by a well supervised trainee.

Denton History

1949 Manchester Local Image Collection

It is listed in a 1968 directory of rehabilitations centres.

Currently forming part of Tameside Business Park with multiple occupancy.

Proximity to the M60, seen here under construction is paramount to its future success.

This former production plant for concrete components is now sadly partitioned and houses a number of businesses, only one of which still has a manufacturing base. The engineer for the project was also the client; reinforced concrete engineers, Matthews & Mumby. The intention was to create large floor areas, free from columns, to accommodate fourteen casting beds of about fifty metres in length. The structure of the two sheds was formed from arch units assembled on the ground, jacked into position and post-tensioned to form large tied span arches. Each arch spans approximately thirty metres and was designed to carry up to fourteen one tonne loads along the monorail hangers that ran the length of the factory, centred to each casting bed and suspended from the arches. Lantern section glazing hugs the curve of the arches that act as a reflective surface to provide an even light across the factory floor. The rails and hangers added a further louvered filter to the light, described at the time as ‘the ‘venetian blind’ effect. Originally the elevation between the V shaped columns was also glazed, this has now been filled and significantly reduces the aesthetic presence of the exposed structure and a distinctly ‘modern’ building of the time. 

Mainstream Modern – my thanks to Richard Brook for the text and archive images.

So one sunny day last week, on a lockdown walk I went to take a look around.

The addition of cladding is never an uplifting sight on any site – the integrity of the building is seriously challenged.

Sometimes a former Rehabilitation Centre can do without rehabilitation it seems.